home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 3: CDPD 3
/
Almathera Ten on Ten - Disc 3: CDPD3.iso
/
scope
/
001-025
/
scopedisk14
/
mach22
/
machii.doc
< prev
next >
Wrap
Text File
|
1995-03-18
|
24KB
|
541 lines
MachII - Mouse Accelerator with Hotkeys (and other stuff).
Version 2.2a 06-04-88.
This program may be freely distributed but may not be used in any
commercial product without prior written permission.
Source available. Shareware donations ACCEPTED.
For those who hate doc files, just type "run MachII" and then
"Cancel" the "Can't Open Configuration File!". Now activate the
clock window with your mouse and press the right button. The
requester displayed has all of your options and hotkeys. Change
them to what you like and save it. AND TRY THIS; hit Alternate-
Escape then Amiga-F1 then type (for example) "diskcopy df0: to df1:"
then hit Alternate-Escape again. Now press Amiga-F1. Also look at
F1 in the requester. Read on if you're still interested.
VERSION 2.1 USERS NOTE!
The configuration file for version 2.2 is incompatible with 2.1.
A program named Convert included in this archive will convert it
for you and preserve most (if not all) of your options.
FEATURES
Hotkeys 20 macros activated with the Amiga- or Ctl-Amiga-
Function keys or by typing the first few letters
of the macro. They may be automatically recorded.
Accelerator Speeds up mouse movements. Adjustable.
PopCli Execute a NewCLI or any other command.
Screen Blanker Blank the screen after an adjustable period of
time.
SunMouse Activate a window by moving the mouse into it.
ClickToFront Move a window to the front by single or double
clicking in any part of it.
Screen Shuffler Use Left_Amiga-M to push ANY screen to the back.
Clock Title bar clock with memory display, date and
low memory warning.
Alarm Set an alarm.
Beeper Beep every 15 minutes. Adjustable.
Meter Maintain online costs. Adjustable rates.
Qualifier Accum Accumulate qualifiers to be added to a key or to
mouse activity such as Workbench's extended
selection.
All features may be turned off. Unused hotkeys are passed through
and may be defined on the fly. Configuration file is saved to disk.
UPDATES:
2.2 a. There are NO commandline arguments. All options are selected
and changed in the requester.
b. The time and memory display alternates with the date. The
number of seconds that the time is displayed is adjustable
with the `Date Delay' gadget. With clock only, the date and
time are displayed together in the format "mm-dd-yy hh:mm:ss".
c. If free memory falls below 50k, the time and memory display is
shown in red (pen 3). This value is adjustable.
d. You can execute commands in macros by using \X. Using "\XNewCli
>nil: <nil:" in a macro is the same as using the Amiga-Esc
Popcli feature.
e. The extra keys of the 500 and 2000 are supported.
f. Using ClickToFront on an already up front window does not
try to do a WindowToFront.
g. You cannot create an icon and run this from the Workbench, you
should put it in your startup-sequence.
h. Pressing the right mouse button will reset the qualifier
accumulator.
2.1 a. All options are saved in the config file.
b. You can now load a config file with a hotkey macro by using
"\fname".
c. Use "\b" in a macro for instant screen blanking.
d. Use single or double click for ClickToFront.
2.0 a. This is a major rewrite of Mach 1.6. Although it can still
do everything that the old one could (and more), the method
of setting your variables and hotkey macros has changed. It
is about 8k larger (about 20k) but if this is to big, you can
always use the old Mach. The nicest thing about this version
is the ability to define a hotkey macro on the fly and if
needed, edit it in a string gadget. There are now 20 hotkeys,
the Amiga-Function keys and the Ctl-Amiga-Function keys.
BUG FIXES:
The accelerator now handles qualifiers correctly so that it
works properly with ProWrite and will add qualifiers to
mouse messages. If using the qualifier accumulator, you don't
need to hold down the Amiga key when using programs like
SnipIt or the shift key when using Workbench's extended
selection. Clicking to front on an already up front window
does not do a window to front.
OVERVIEW:
MachII is a utility program that provides many optional features
for both CLI and WorkBench users (although it cannot be started from
an icon). Your own configuration may be saved to disk. Each function
key may be used as a hotkey and hotkeys may be defined on the fly.
Other features include a SunMouse that automatically activates the
window that the pointer is over, ClickToFront which allows you to
bring a window to the front by single or double clicking in any part
of it and many clock features. It is very easily configurable to your
own desires. If you don't like a feature, just turn it off. Pop up
the configuration requester by either activating the clock and
pressing the right button or by typing Control-Amiga-Escape. A
configuration file is not neccessary but without one you will get the
defaults. You will also get a "Can't Find Configuration File"
requester. After you have setup your macros and other options, you
can save this to the file s:mach.config.
USAGE:
Run MachII
After it is running, you may either activate the clock with the mouse
and press the right button or press Control-Left_Amiga-ESC. This will
pop up a requester jammed full of gadgets. All options and hotkeys
may be modified here.
The gadgets are:
1st ROW
1st: Toggle between Amiga and Control-Amiga hotkeys.
2nd: Clear all hotkey definitions.
3rd: Abort a macro definition.
4th: Change the maximum macro size.
2nd ROW
1st: Select each hotkey with the 'Fn' gadgets.
3rd ROW
1st: Hotkey macro definitions.
4th ROW
1st: Left_Amiga-ESC execute string.
5th ROW
1st: Activate/deactivate SunMouse.
2nd: Select 0, 1 or 2 clicks for ClickToFront.
3rd: Activate/deactivate the Amiga-M Screen Shuffler.
6th ROW
1st: Activate/deactivate the Qualifier Accumulator.
2nd: Toggle the Clock.
3rd: Toggle Online Meter.
4th: Reset Online Meter.
7th ROW
1st: Select Auto Clock To Front or Clock Depth Gadget.
2nd: Select Clock Only or Clock + Memory.
8th ROW
1st: Select the Clock's left edge.
2nd: Select the Clock's top edge.
3rd: Select the number of seconds for the time to display.
4th: Select online rate. ($00.00 - $99.99)
9th ROW
1st: Select blanking interval. (0-99 minutes)
2nd: Select beep interval. (0-999 minutes)
3rd: Set the alarm time. 24 hour format.
4th: Change the acceleration rate. (0-9)
10th ROW
1st: Step through the 4 special functions.
2nd: Select a key for the special function.
3rd: Set the memory level to receive low memory warning.
11th ROW
1st: Select the Alternate qualifier for the special function.
2nd: Select the Control qualifier for the special function.
3rd: Select the Shift qualifier for the special function.
4th: Select the Amiga and C= qualifiers for the special function.
12th ROW
1st: Configuration file name.
13th ROW
1st: Done.
2nd: Load configuration file.
3rd: Save configuration file.
4th: Remove MachII.
Hotkeys:
There are 20 hotkeys. 10 are the Amiga-Function keys and 10 are the
Ctl-Amiga-Function keys. In the requester you can select each hotkey
with the 'Fn' gadgets and toggle the Ctl-Amiga/Amiga gadget.
The hotkey macros may be edited in the string gadget. The default
maximum macro size is 255 characters but this may be changed in the
size gadget. You cannot change the size while you are creating a new
macro and the new macro size will not take effect until you select
"Done". This controls the size of dynamic buffers which are allocated
only during macro definition or when the requester is up. The actual
macros take up only as much space as they need.
Macros are invoked either by hitting the Amiga- or Ctl-Amiga-Function
key or by hitting Shift-Alternate-Escape and then type some of the
first letters of the macro and then return. The first macro found
that matches will be executed. If none is found there will be a beep.
See the Special Keys section for changing the keys used.
To define a macro, type Alternate-Escape, an Amiga or Control-Amiga
function key and the type your macro. During these steps, you will be
prompted by messages in the clock and by beeps. You may use any keys
including qualifiers, arrow keys and numeric keypad keys. When
finished, hit Alternate-Escape again. You may now use your macro by
hitting the Amiga-Function or Ctl-Amiga-Function key or by hitting
Shift-Alternate-Escape, enough characters to uniquely match the
macro followed by return. You may also edit the macro in a string
gadget by hitting Control-Amiga-Escape or by activating the clock
window and pressing the right mouse button. All of these special
keys can be changed to your own preferences.
Sample recording and playback session: (Special keys are shown in <>)
<Alt-Esc><Amiga-F1>Diskcopy df0: to df1:<Alt-Esc>
'Diskcopy df0: to df1:' is now bound to the Amiga-F1 combination.
To play this back, you can type either:
<Amiga-F1>
Or
<Shift-Alt-Esc>dis<Return>
The second method searches until it finds a macro whose first letters
match 'dis' and then plays the rest back. This is useful if you don't
remember the function key but do remember what it begins with. If you
also had a macro that began with 'disp' and it was before 'diskc...',
and you typed only 'dis' the first one matching 'dis' would be played
back. In this case you would need to type 'disk'.
You may start a learning period, do a series of complex editing
commands and then replay all of it. Or edit it and save for later
use. This is especially useful when using word processors that don't
have macro abilities built in.
The escape character "\" may be used for the following:
\N Newline (return).
\T Tab.
\E Escape.
\D Del.
\B Backspace.
\H Help.
\u Up arrow.
\d Down arrow.
\l Left arrow.
\r Right arrow.
\0 Numeric pad 0.
.
.
\9 Numeric pad 9.
\. Numeric pad ".".
\- Numeric pad "-".
\e Numeric pad ENTER.
\( Numeric pad "(". (Amigas 500 and 2000 only)
\) Numeric pad ")". (Amigas 500 and 2000 only)
\* Numeric pad "*". (Amigas 500 and 2000 only)
\+ Numeric pad "+". (Amigas 500 and 2000 only)
\/ Numeric pad "/". (Amigas 500 and 2000 only)
\F1 Function key 1.
.
.
\F0 Function key 10.
\b Instant screen blanking.
\f Load config file using name following f.
\X Execute the string following X.
These last three are special in that they cannot be recorded
live but must be entered in the string gadget.
\ffilename and \Xstring must be at the end of the macro.
Qualifiers modify the character immediately following these:
\C Control.
\S Shift.
\A Alternate.
\L Left-Amiga.
\R Right-Amiga.
An example:
\Cc\u\A\S\l
This plays back the key combinations:
'Control-C' 'up arrow' and 'alternate shift left arrow'
Function keys not assigned to a hotkey string are passed through.
Escaped letters are case sensitive.
Note above that function key numbers are single digits. This means
that 0 is F10, 1 is F1, 9 is F9.
Accelerator:
The accelerator speeds up mouse movements.
Its speed is set 0 - 9.
0 = no acceleration.
NewCLI:
The Left-Amiga and ESCape combination will create a NewCLI.
You need to have NewCLI and Run in the c: directory. The NewCLI
will have the same size stack as MachII. You can change the command
in the execute string gadget.
A full window example is "NewCLI CON:0/0/640/200/MyCLI".
You can also use the \X feature in a macro to execute a string.
Screen Blanker:
After 5 minutes of no mouse or keyboard activity, the screen will
go blank. You can change this default in the Blanking gadget.
You can use \b in a macro for instant blanking.
0 disables blanking.
Sun Mouse:
The window that the pointer is over becomes the active window
after the first mouse movement. To be able to drag icons, the
Sun Mouse is disabled while the left button is held down.
Turn on or off with the SunMouse gadget.
Click To Front:
You can single or double click in any part of a window and bring it
to the front.
Select 0, 1, or 2 clicks with the ClickToFront gadget.
Screen Shuffler:
Left_Amiga-M will push the front screen to the back instead of
pushing workbench to the back. Left_Amiga-N will still bring the
workbench to the front. This is useful if you have more than two
screens on at once, especially if they don't have screen depth
gadgets.
Turn on or off with the Amiga-M gadget.
Qualifier Accumulator:
Many disabled people find it difficult if not impossible to type key
combinations such as Control-Shift-F1. MachII has the ability to
remember qualifiers that are pressed and add them to the first
non-qualifier key pressed. So you could for example, type Control,
Alternate, and then F1. The Control and Alternate would be added to
the F1 just as if they were pressed at the same time. This is not
intended for someone who doesn't need it as it sometimes may cause
unexpected results. For example, if you type Control and then change
your mind, the Control will still be added to the next key pressed.
Pressing Caps Lock or the right mouse button will reset the
qualifier accumulator.
This may also be used with Workbench's extended selection. Hit the
Shift key, then click on your icons. Hit any non-qualifier key or
the right mouse button to clear the Shift.
Turn on or off with the Qual Accum gadget.
Clock:
There is a title bar clock that displays available memory and the
time. The clock is updated every second and brings itself to the
front (if covered up) every 4 seconds except when the left button is
held down. Sometimes this covers up information in the title bar so
if you don't like this use the 'Auto Clock to Front' gadget. This
disables the auto upfront and adds an (almost) invisible depth
gadget. The date alternates with the time and memory display. The
length of time that the time is displayed is adjustable with the
'Date Delay' gadget. The time and memory display are displayed in
red (pen 3) if your total free memory falls below 50k. You can
change this value in the 'Low Mem' gadget. You can use the 'Clock
Only' gadget and get the clock and date displayed together in the
format "mm-dd-yy hh:mm:ss".
Positioning the clock:
You can change the clock's left and top edge in the requester
gadgets 'Clock LE' and 'Clock TE'. These are the current left edge
and top edge for the clock. There are 3 methods for setting these.
1. You can position the clock then pop up the requester and save the
new position.
2. Enter -1 and 'return'. The gadgets will then be updated.
3. Enter the desired values in the gadgets.
The width for the clock alone is 146 pixels. The clock with memory
display is 290 pixels wide. Turn the clock on or off with the Clock
gadget.
Alarm:
You may set 1 alarm time in 24 hour format. When it goes off, it
will beep longer than the interval beeper and the screen will
flash. Set to greater than 2400 for no alarm.
Beeper:
There is a beeper (to keep you awake) which defaults to a 15
minute interval. Change this in the Beeping gadget.
Meter:
MachII has an online cost meter. Use the Meter gadget to toggle
between the meter and the clock. Use the Reset gadget to reset the
meter. The rate that it uses may be set in the Online Rate gadget.
The meter runs continuously whether visible or not. The default rate
is $4.75.
Special Keys:
There are 4 special functions selectable from 33 (or 38 for the 500
and 2000) special keys and 5 qualifiers. They all have default
values but these may be changed in the requester.
Start/Stop - This starts or stops a macro definition or learning
period. Type the key combination, then type the Amiga-
Function or Control-Amiga-Function key that you want
this macro to be bound to, then type your macro. When
finished, type the key combination again. This ends
the learning period. You may now execute the macro by
typing the Function key with the Amiga or Control-
Amiga qualifier. You may also view or edit the macro
in the string gadget in the requester.
Default key = Alternate-Escape.
Execute - This executes the NewCli command. You may change the
executed command in the requester.
Default key = Amiga-Escape.
Requester - This pops up the requester just like the pointer over
the clock and the right button does.
Default key = Control-Amiga-Escape.
Matcher - This is used to find and execute a macro. To match,
type the key combination, then type enough letters
that match the desired macro, then type 'return'. The
rest of the macro will be executed.
Default key = Shift-Alternate-Escape.
Note that selecting 'C= / Amiga' allows you to use either the Left
Amiga (C=) key or the Right Amiga key. Clicking on the left half of
the Special Key gadget steps down through the keys, clicking on the
right half steps up. The special keys are: Tab, Escape, F1-F10, Del,
BackSpace, Return, Help, all arrow keys and all numeric keypad keys.
The 500 and 2000 have 5 keys that the 1000 doesn't, the numeric pad
keys "(", ")", "*", "+", "/".
Uninstall:
Use the Remove gadget to uninstall MachII.
MISCELLANEOUS:
I have found that the hotkeys do not function properly with the
program Sili(Con:).
When a string gadget (or any gadget anywhere) is active, the
SunMouse will not work.
This program will NOT work from Workbench. Put it in your
startup-sequence. Use RunBack or ARun to allow the CLI window
to close.
Let me know if you find any incompatibilities.
MachII may fail to run for any number of reasons (e.g. no free
signals, insufficient memory). You will be informed of this if it is
started with the Run command. If started from RunBack or
RunBackGround (public domain program that will allow the CLI window
to close and available on Fred Fish disk # 65) and MachII fails,
you won't get any messages. The ARP command ARun may also be used.
The NewCLI brought up by Left_Amiga-ESC will have a stack the same
size as MachII. Many programs that you may run from this CLI need a
larger stack so either run MachII with a larger stack or, after you
get a NewCLI, use the stack command to set your stack to a larger
value. If programs mysteriously crash when run from the NewCLI, it
may be caused by the stack size.
If the macro size is set too small and you try to load a config file
with longer macros, you will get a "Not A Mach Configuration File!"
message. If you set the size too small and then select "Done" then
activate the requester again, the macro size will be set to the
size needed for the largest macro.
Copyright 1988 by Brian Moats
Polyglot Software
10431 Ardyce Court
Boise, Idaho 83704
(208) 375-3741
PeopleLink - BrianM
CI$ - 76167,2334
Other programs for the Amiga 500/1000/2000 from Polyglot Software:
M18Cheater - Lets you cheat in Mean 18 by causing your opponent to
slice. Public domain.
----------------------------------------------------------------------------
FunBut - Lets you use the F1 key instead of the left mouse button.
It's useful when playing games like Defender of the Crown
because it sends repeat mouse clicks. Public Domain.
----------------------------------------------------------------------------
4 IN ONE - Four easy to play games on one disk.
SlotCars For 1 or 2 players, arcade type driving and
shooting game. Seven screens, great graphics.
CircuitMania For 1 or 2 players, surround your opponent
in a maze of wires.
ShufflePuzzle Like the sliding number puzzles that you used
to play as a kid but this uses beautiful color
pictures.
Follow That Tune Follow the bouncing boy as he jumps from
pedestal to pedestal playing musical notes.
These games are integrated into an easy to use package.
Enjoyable for all ages. All use digitized sound. $29.95
----------------------------------------------------------------------------
Dominoes - 3d graphics, speech, tutorial. More entertaining and
challenging than Shanghai. $24.95
----------------------------------------------------------------------------
The Crossword Creator - Make or solve crossword puzzles. 40,000+ word
pattern matching dictionary, med-res or interlace,
IFF compatible and many more features. $49.95
